Please contact us at firstname.lastname@example.org to puchase / for product enquiry.
Bollhoff P2007 - Pneumatic setting tool for blind rivet nuts and studs
Bollhoff P2007 is designed to set Rivkle / rivet nut M4 to M10, Rivkle rivet stud M5 to M8. It is a robust and light weight hand operated air tool.
The pulling force of rivet nut with Bollhoff P2007 is controlled by setting a correct pressure, the pressure setting principle consists of adjusting the device to a particular force (daN), the adjusted force corresponds to the pulling force to be exerted in order to set the rivet nut. The advantage is no adjustment required when there is change of material thickness, and it will not cause damage on the threaded mandrel or rivet nut with second or third trigger.
To set different dimensions (M4 to M10) of RIVKLE blind rivet nut or stud, a corresponding exchange unit consists of threaded Mandrel and Nose piece are required. Example : to set M6 rivet nut, you need M6 mandrel part no. 2361 130 6020 and M6 Nose piece part no. 2361 130 6030. Mandrels and Nose piece are optional, to be purchased separately.
Bollhoff P2007 is delivered in plastic carrying case without threaded kit (mandrel and nose piece).
|Capacity||RIVKLE M4 to M10|
|Maximum stroke||7 mm, pressure control|
|Setting force daN||350 daN (3.5 kN) to 2300 daN (23 kN)|
|Compressed-air connection||5.5 bars min. to 7 bars max.|
|Air consumption||8 lt. max. per clock pulse|
|Noise level||< 70 dB (A)|
|Cycle time||up to 15 RIVKLE per minute|
|Dimensions||height 322, width 216 mm
Please contact us at email@example.com to puchase or for product enquiry.
Plastic carrying case without threaded kit (mandrel and nose piece).